We Have Numbers Of Free Samples

Question

The task is to design a similar type bagging machine as shown in the attached document.

This machine is normally manually operated; however, I would like to automate it by adding an electric winch with a cable that can lift the bucket with a maximum load of 200lbs.

Below is the link to a video of how this machine is manually operated. In the attached I have sketched how the winch is to be attached to the machine. If you have any additional ideas or suggestions, I am open for it.

What I would like is to design this machine in SOLIDWORKS with a stimulation showing how it would be operated.

NOTE– I am the 2019 version of the SOLIDWORKS program. Also send me the step-by-step instructions for stimulating the machine in SOLIDWORKS.

S No.	Components	Material	Specification
1	Base Plate	Mild Steel	Width: 55mm Height: 610 mm Cross-section: 550×3 mm
2	Wheels	Polymer	Wheel diameter: 125mm & Thickness = 25mm
3	Hopper	GI Sheet Metal	Upper width: 120 mm Lower width: 620 mm Height: 550 mm
4	Frame	Mild steel	W*H*T 31mm*31mm*3mm
5	Lifter	Mild steel	W*H*T 31mm*31mm*3mm

Solution: SOLIDWORKS Model

Figure 1: SOLIDWORK Project

 

Figure 2: Front

 

Figure 3: Left

 

Figure 4: Right

 

Figure 5: Top

[Download not found]

Download